How-To

• Update Module Firmware
  • Remote Bootloader Update
• Use ADC Ports in Hexabitz Modules to Read Analog Signals
• Use the Command Line Interface (CLI)
• Power your Modules
• Debug Module Code
  • Debug your Keil uVision Code
  • Debug your STM32CubeIDE Code
• Make a Pre-built Array Topology File
• Use Hexabitz with Linux/MacOS
  • Use Hexabitz CLI on Raspberry Pi OS (32-bit) with Putty
  • Use Hexabitz CLI on Ubuntu OS with Putty
  • Firmware Update on Ubuntu with STM32CubeProgrammer
• Start Coding with Hexabitz
  • Writing Code with Keil uVision
  • Writing Code with STM32CubeIDE
• Connect Hexabitz to External Hardware
  • Connect to a PC .Net Software using Virtual COM Port
  • Connect to a Raspberry Pi Single-Board Computer
• H07R3x – Audio Speaker and Headphone Jack Module
  • Embed and Play WAVE Files
• H23R1x – Bluetooth V4.0 Dual Mode Module
  • Update smartBASIC Scripts on the BT900 Module
• Build GUI using STM32CubeMonitor
  • Activate Hexabitz built-in GUIs
  • Building from scratch
• Utilize Modules Ports as Independent Controller Ports Outside of BOS System