USB-B to UART Converter (H1AR10)


SKU: H1AR10 Category:

USB-B-to-UART Converter

Stage: Alpha

In stock


H1AR10 is a USB-B-to-UART bridge module based on FTDI FT230XQ-R and STM32F0 MCU. It provides both power and communication through a virtual COM port.

  • Use this module to add USB 2.0 type-B serial ports to your Hexabitz arrays or other projects.
  • You can power your array from the USB port as well. USB power can be easily disabled via a jumper.
  • You can easily connect the USB port to any of module array (UART) ports or even do advanced multiplexing using DMAs and software tricks.



  • FTDI FT230XQ-R USB 2.0 Full Speed to serial UART converter:
    • 300 baud to 3 Mbaud data transfer rate.
  • TI LM3940IMP-3.3/NOPB 3.3V / 1A low dropout regulator regulates the USB Vbus down to +3.3V.
    • 2-pin 2.54mm jumper to enable/disable 3.3V output voltage from Vbus.
  • USB-B through hole, right angle receptacle USB connector.


  • STM32F091CBU6 32-bit ARM Cortex-M0 MCU.
  • 8MHz external oscillator.
  • Five array ports and six power ports (+3.3V and GND).
  • Access to 5xUART, 2xI2C, SWD, BOOT0, RESET.

Physical Properties

  • Shape: Hexagon
  • Size: 30 mm short diagonal, 17.32 mm side
  • Area: 7.8 cm^2
  • Weight: 1.3 g
  • Soldermask Color: Dark green
  • Surface Finish: ENIG (gold) or HASL-LF (tin)

Bill of Materials



Frequently Asked Questions

Load More

Have more questions? Please check our main FAQ page and feel free to contact us for any unanswered questions.


  • Schematics (PDF)
  • Hardware Design Files (Circuit Maker)
  • Source Code (GitHub). Download a pre-compiled firmware HEX file here.
  • Documentation / Factsheet (PDF)
  • Projects & Examples: Please check our account on Hackster.io for demo projects and examples.
Contact Us

Have anything to ask? Send us any questions or comments and we will get back to you asap.


You are leaving this website to visit our Hackster.io account. Enjoy your time!