RS485 Serial Transceiver (H1DR1x)

$0.00

RS485 Serial Transceiver

Stage: Alpha

Available on backorder

Description

H1DR1x is an RS485 serial transceiver module based on Maxim Integrated MAX14840EASA+ transceiver and STM32F0 MCU.

  • Easy-to-use and compact 3.3V RS485 half-duplex transceiver with high ESD protection for long-range wired serial communication and industrial applications.
  • 120 Ohm DC termination resistor included on each module and enabled / disabled by a solder jumper/ zero-Ohm resistor
  • 100 nF AC termination included on each module and bypassed by default with a solder jumper / zero-Ohm resistor.
  • Use this module to connect to industrial equipment that supports RS485 interfaces such as PLCs, motor drives, and energy meters, among others.
  • Can be configured in either one of these modes: UART-RS485 bridge, or Modbus RTU terminal, or Modbus ASCII terminal.
  • Program advanced C code using our easy-to-use APIs and messaging system.
  • Use separately or combine with other Hexabitz modules and external hardware.
 
 

Specifications

Front-end

  • Maxim Integrated MAX14840EASA+ RS-485 half-duplex transceiver:
    • +3.3V ESD-protected transceivers.
    • Up to 40Mbps half-duplex data rate.
    • Symmetrical fail-safe and large receiver hysteresis (170mV) providing improved noise rejection and improved recovered signals in high-speed and long cable applications.
    • Industrial ambient operating temperature range (-40 °C to +125 °C).
  • RS485 bus connector: TE Connectivity/AMP 2-position 5.08 mm shrouded header.
  • 120 Ohm, 0603 SMD DC termination resistor included on each module and enabled / disabled by a solder jumper/ 0603 zero-Ohm resistor. The DC termination is disabled by default.
  • 100 nF, 0603 SMD AC termination included on each module and bypassed by default with a solder jumper / zero-Ohm resistor.

Back-end

  • STM32F091CBU6 32-bit ARM Cortex-M0 MCU.
  • 8MHz external oscillator.
  • Five array ports and six power ports (+3.3V and GND).
  • Access to 5xUART, 2xI2C, SWD, BOOT0, RESET.

Physical Properties

  • Shape: Hexagon
  • Size: 30 mm short diagonal, 17.32 mm side
  • Area: 7.8 cm^2
  • Weight: 6 g
  • Soldermask Color: Dark green
  • Surface Finish: ENIG (gold) or HASL-LF (tin)
 
 

Projects

Please visit this product projects on Hackster.io network.

BOM

H1DR10 BOM

 
 

Quickstart Guide

Download a PDF version here.

FAQ

Frequently Asked Questions

Have more questions? Please check our main FAQ page and feel free to contact us for any unanswered questions.

 
 

Factsheet

Download a PDF version here.

Resources

  • Schematics (PDF)
  • Hardware Design Files (Circuit Maker, EAGLE)
  • Source Code (GitHub). Download a pre-compiled firmware HEX file here.
  • Documentation / Factsheet (PDF)
  • Projects & Examples: Please check our account on Hackster.io for demo projects and examples.